KitchenAid KSM150PS Artisan Series Stand Mixer "hits side" Questions

hits side of bowl I have tried adjusting the screw to lift/lower the beater but it hasn't helped, since it's hitting the side of the bowl, not the bottom. No matter what I do (raise/lower), it

Why is my mixer hitting the sides. see if this link can help you out. Why is my mixer hitting the sides Google Search

...hits bottom of bowl beaters vibrate and hit side of bowl Your worm gear is no longer seated and that is more than likely because the housing cover is probably the old style plastic and it has cracked ...

hits the bowl its been dumped on the side and bent it. I have done this on sight I get a mapp torch and use a pipe wrench large one and heat it up at the bend where it goes in side and bend it out. or

hits bottom of bowl I've tried to tighten screws with no results Try adjusting the height of the head by turning screw #36 counterclockwise a turn or so. This will raise the mixing head so the beaters

...hits the bowl when in motion. I think from your description that the the head connecting to the base shaft needs tightening. Put the mixer on it's side UNPLUGGED. Look up inside the base and you'll ...

bowl flies off of base- beaters are hitting the sides of the bowl There should be a turntable offset to avoid contact ofbeaters and bowl. chk the base for a slide lever.

adjusting the beater it hits the side I've tried adjusting that screw but did't help it also makes a clumping noise this the first time to use it It would help if you told us the brand and model.

My Hobart Kitchenaid K45 clicks when under load. Any thoughts? It could be the worm gear has lost a tooth. It could also be tha tthe beater it hitting the side of the bowl and the head needs adjusting

...hits the side of the bowl on the left side only, and there is a big space on the right hand side. I have searched the forums, hoping to find some kind of answer. Someone suggested measuring the bowl ...