KitchenAid KEMC377K Convection / Microwave Oven "tool needed open back" Questions

open the back of the microwave, I think it needs some special tools. Is there way to open just the control panel area and get access to the door opener. I believe the only way of gaining access to the

...open in an extremely snug fit- I attempted to pull it out without nuch success. I also attempted to find an L shaped slim non-scratching tool which I could slide up to attempt to disengage the second ...

...open This is very dangerous, unfortunately it is also not easy to fix. There is a small switch behind the plastic actuator that is malfunctioning. You will need to remove the shell. You may need ...

...open)the oven with electrical tools trace the wire to the fan and the turntable to locate the loose wire from it position fix it back with care or if there is any burn wire from those wire then the ...

...tool such as a putty knife. I've attached a photo that should serve as a good example. Removing door assembly and replacing related parts of Neff B7740N0GB It is helpful to have access to the spare ...

open it again. Good luck! Hi. There is no mechanism that will release the door. The door interlock circuit is broken. The door lock on Sharp MW oven gets opened when the latch is energizing. By prying

...open the front control panel by inserting and turning a 5mm allen key into the opening on the top of the oven. While the oven is at the home screen, flip the dip switch #1 on the back of the control ...

...an answer for something that cannot be explained online adequately... 4. specific training, tools, or equipment are required to avoid injury or death... 5. the Experts that are online simply ...

open the microwave to check inside if switches are in their place or broken first , it need to be taken out wheres mounted , your gonna need someone whos handy and have the requirements tools , its an

...open in an extremely snug fit- I attempted to pull it out without nuch success. I also attempted to find an L shaped slim non-scratching tool which I could slide up to attempt to disengage the second ...