KitchenAid KEMC377K Convection / Microwave Oven "tension oven door" Questions

...oven and used to have a a spring that provided tension so that the door did not drop. I ordered part 4375324 tesion spring to fix the problem, but I can t figure out how to take the door apart. Is ...

...LATCH IS NOT WORKING There should be tension from the spring that pulls the door hook down. If there is no tension, the anchor for the spring has broken off and the outer door frame must be

...when push the door open button. Ordered part (push button door part) but did not solve problem. Door still won't open unless you pry it open. What can I do to fix this? check tension spring on ...

...Oven Microwave Combo. The microwave door spring broke. How do I replace it? Remove the front panel by removing the screws located on the inside of the door (note hold door inplace, since it is heavy ...

...tension spring on door. Can I reconnect spring to metal frame or will there be too much tension? If you very carefully prise off the inner trim of the door you should be able to see where the lug ...

...door have no tension. Microwave thinks door is open, because latch is not ingaging. How do I access the latch hardware. with butter knife or small flat head screw driver, carefully remove the plastic ...

...tension on your door latch heads (door hooks) is broken. You can confirm that by pushing up on the door hook. If it goes up with no real resistance, the spring is unhooked. Fixing that would require ...

oven The door won't latch and turn off the interior light. It seems there is no tension in the two plastic latch hooks in the door and they will not lock in place in the main body of the m/w. I assume

...oven model kcms 1555. The button for the door does not have any tension as a result the door will not latch close, light will not turn off It sounds like the door spring had broken. Take the covers ...

oven The door won't latch and turn off the interior light. It seems there is no tension in the two plastic latch hooks in the door and they will not lock in place in the main body of the m/w. I assume