KitchenAid KEMC377K Convection / Microwave Oven "hinge side door popped" Questions

side bottom door hinge. EASY get a machine screw, nut with washer. I believe I used a 1/8" machine screw.....(find something small to fit in the hole on the bottom hinge. First step, take 3 screws off

...hinge side but it will pull away quite easily. The plastic outer door panel is very flexible but I'm sure it will crack if you try to separate it too far so use your eyes and watch what you'r doing. ...

...hinge side it will pop off and the screws that hold the handle can be accessed and remove and replace the handle. to reinstall that shroud gentle push it in with your fingers you can go to ...

...door at the side where the hinges are attached. There are 4 screws holding the handle in place. I can access two, but it looks like I need to remove the inner portion of the door to access the ...

...hinge side pushing with your thumbs while your helper maintains outward pressure so the clips do not snap back in place. Work it around on top and bottom at the same time. Carefully lie it on the ...

...door and the oven frame on the side with the latches (usually next to the control panel). You may have to pry the bottom of the door open just a bit. The object is to push up the lower door latch ...

door, and look for two Phillips screws along the left side of the control panel. Remove these screws. Lift up on the control panel, and tilt it outward. The control panel will rest on its hinges. Step