Troy-Bilt TROY-BUILT 91215 - TROY-BUILT 20416 Pressure Washer 5HP Gas 3000 PSI Gas Powered "washer sound jet engine" Questions

...washer with a Briggs and Stratton engine. I changed the oil, spark plug and air filter. System starts up ok. After about 15 to 20 minutes using the machine, the engine begins to fluctuate (I noticed ...

...washer it tipped over. Blue smoke (oil?) came out the exhaust and the engine stopped in about 5 seconds. I cleaned out the filter assembly (some engine oil) and removed and cleaned the spark plug No ...

...jet then it pulses off and on It sounds like you either have a clogged nozzle or one that is too small for your pump. At lower speeds the pump is pumping less gpm. So your unloader valve does not ...

...washer buidling up pressure but no water. Do I need a new pressure hose and maybe a new gun assy? I like to think the engine and water pump are fine. The engine starts up right away and runs like a ...

the pressure washer i rented won't start after having used it for a couple of hours and filled it once with new fuel and then running it again for 30 minutes. i refilled it and now it won't stay going

I recently freed a seized engine by spraying wd 40 in it . I put new fuel in and changed the oil. The engine starts and runs on full choke. I ran it for about a minute .When I tied to move the choke ...

I have a wood splitter that has a honda GCV160 5HP engine, when I choke it to start, it does find, but when I push the choke in, the engine will not run smoothly, it acts like it's not gettingg en

washer 3000 psi 4gal/min Hard to start and dies out after 20 seconds after the engine gets hot and running after multiple starts the engine will stay running but then dies every 30 minutes There are a

engine stops...I cleaned the spark plug and its has been sitting for three years. The gas is new Carburetor needs to be cleaned. It sounds like a clogged/gummed high speed jet that's not providing

The engin will start and turn off. Then will not turn on at all. Im not sure if your saying it wont restart or not even turn over. If it wont start but turns over it sounds like the carborator float ...