i am replacing an 8 year old maestro 603 master dimmer with a new one. There is one companion dimmer in the circuit.55 the old dimmer had a black, red, and blue wire but the new one has a black, brass
wires come from breaker box?? It should be a black and white wire. Let's test to find Hot and Neutral that come from breaker box. Mark your wires. Disconnect all the wires and separate from each other
...black wires and one green wire. how do I hook it up as a single pole dimmer? One black is will hook up to one of the black wires inside the switch box in the wall and the other will hook to the other ...
Question about Leviton Electrical Supplies
...black wire to the power (common wire) in the switch box and the other to the wire going to the incandesant light fixture. (Standard dimmers cannot be used with CFL type bulbs). You should be working ...
...black wires in the ceiling box. Did you connect the fan and light to those wires? If so, the following information will help you wire the switch. Your incoming Hot line is probably the larger black ...
Question about Leviton Electrical Supplies
...black,(power) red to red with all present white( neutral) already tied together. Green to bare ground and 3way red wire capped off. My question is now the metal part of the dimmer housing gets pretty ...
Question about Leviton Electrical Supplies
...black, blue wires. These are hooked to Yellow to black-white, blue to red, black to black. How do they connect to a 2 screw switch or can I.... once again stop. you are asking the wrong questions.... ...
Question about Leviton Electrical Supplies
...a red, green,and red,2 black wires what wires go together I only want to control one light in 1 location Al http://www.automanualparts.com/wiring-diagram-for-3-way-switch-with-dimmer/ use above ...
...wires (it was installed in 1985). On one side, there is a red and black wire. The dimmer red wire is connected to a black wire from the wall and the dimmer black wire is connected to a pink wire from ...
...wires. I am not sure if connecting between the black and white burnt out your dimmer, so I mention connecting the black and red to test for the light operation. You can also check in the light box ...
2 questions posted
Usually answered in minutes!
11 Questions
11 Questions
11 Questions
8 Questions