...wall and tighten them. Then I would put on a cover plate and call it finished. If the box is not in the wall then go to a big box store and get a rework box, the sales people will be glad to help
Question about liftmaster Electrical Supplies
...wall plate to pop it off. As I was doing it on a side, the wall unit lighted up - it seems like there was a wire that was pinched and my trying to pop off the wall unit helped. So, I ended up not ...
Question about Connecticut Electric Electrical Supplies
...PLATE ON YOUR COMPRESSOR, U CAN USE A 220 VOLT SINGLE PHASE NONE FUSED 60 AMP INDOOR OR OUTDOOR TYPE DISCONNECT FOUND AT ANY ELECTRICAL SUPPLY HOUSE, AROUND $20-30 IF I HAVENT BEEN UNDER AROCK FOR ...
Question about Electrical Supplies
...wall button still works when the lock is turned on. The lock only turns off remote access. I doubt that the lock is an issue. Here is a link to a liftmaster owners manual ...
Question about Leviton Electrical Supplies
to fit the cover properley after i tiled the wall you can get some spacers from any big box store, they are made by Gardner Bender, and are usually bright green in color, found in the electrical aisle
Question about Electrical Supplies
...of the plate so the assembly has to come off the wall if you cannot see the mounting screws at the front for the assembly , clip off the switch assembly cover and the screws will be behind that ...
...wall toggle switch - color to suit your taste ... gray, ivory, white, brown or red usually. Expect to pay less than $3.00 and maybe as little as 75 cents. It is simple ... turn off the power to the ...
...plate.Unscrew both screws holding switch into wall box.Pull switch outward to stretch wires.Take photos so you can reconstruct wiring if necessary.Note color of each screw.Green is for ground ...
11 questions posted
Usually answered in minutes!
55 Questions
32 Questions
32 Questions
23 Questions
19 Questions