Leviton Decora Light Dimmer Switch "put new fixture" Questions

put a switch on a existing light that has a power source from the main panel then carrys on to other wall receptacles.i just want the light to go on and off with the switch, not the receptacles. there

...then you need to replace switch. You need to turn off the breaker or remove the fuse powering that switch first. remove the wires from switch, and put wires back at the same screws on the new

...put your wires? The screws are color coded. Look at the screw colors on old and new switches and follow same pattern. If this is incorrect, answer back and I will help. If you are adding another ...

...put (2) two-way light bulbs into wall outlets and they don't work ! What I want to do: as you enter a room, and turn light on. As you pass through the room and are exiting the room, you want to be ...

...new light switch but cannot figure out how to wire the dang thing. It only has the two screws on the side. The dimmer has black, red, yellow and green wires. The green isn't hooked to anything ...

...new dimmer switch and adjust the brightness with the slide...I just can't turn the light fixture on/off with the power button. I was sure to label all the wires and duplicate the connection from the ...

put the two wires going to a switch together whatever you had connected to it would come on, therefore placement of those wires is not important. Hope I helped... Tim i don't know how to change an old

new switch. One black wire to each brass screw, and then tie white wires togethr. If light does not turn on, your light is suspect. Open light fixture and test black to white and black to ground again

...Put the continuity tester on the power wire. Test power wire to each of the other wires. Click the switch and test to each of the other wires. Mark which wire lights up continuity tester. Click the ...

...new switch box. You dont even have to cut the white wire. You will wrap the green or ground around the ground screw on the switch, Cut the black wire . put one end under one side screw, put the other ...