...2 screws. Green screw is for bare ground wire. 1) One side will have dark screws and the other side will have brass screws. The dark screws will be connected together with a brass plate. The brass ...
2 way switch diagram I have a 2 gang 2 way light switch and would like to wire both switches as 1 way switches ? You'll have to get new one way switches and replace the 2 ways.
...(line) 240 volt wires to terminals 1 and 3 and the outgoing (load) wires to terminals 2 and 4. Of course, connect the (bare or green) equipment ground wires from both cables to the "GR"
4 WIRE DIMMER SWITCH DIAGRAM 1 RED ,1 GREEN, 2 BLACK Green is ground. Both blacks are hot Red is neutral (white)
how do I wire a 2 in 1 switch Copy following link for double switch wiring diagrams.http://waterheatertimer.org/How-to-wire-switches.html#double
Question about Intermatic Electrical Supplies
...1 2 3 4 T-104 clock motor must receive 240Volts to operate. Clock motor wires are white-colored and can be seen connected to terminals 1 and 3. ...
...1 light on 2nd pull = 2 lights on 3rd pull = 3 lights on. Westinghouse 4-wire fan switch. ...
...and connect L and 1. White N Neutral from breaker box connects to terminal X. 2) Cable going to Load: Black connects to terminal 2 White connects to terminal X. So both white wires are on terminal
...a 1808 cininnati shear', built 1956 this motor runs back gauge, forward and backwards in 2 speeds forward and 1 speed backwards. thanks, if any help is available. YOU CAN CALL THE MAKER OF THE ...
...1 & 2: http://waterheatertimer.org/images/T-104-control-240V-Load4-35.jpg More info: http://waterheatertimer.org/How-to-wire-T104-Intermatic-timer.html I am assuming you have the 240 VAC clock ...
21 questions posted
Usually answered in minutes!