Broan-NuTone P66V Fan Control Switch "replace light bathroom fans" Questions

...replace it with a Broan Nutone P66V three function control Leviton triple switch Nutone P66V Nutone looks like an ordinary three-switch combo being marketed as a bathroom 'fan switch.' The screws on ...

light kit to replace one in inline light fan kit halo I cant seem to find a light kit to replace the one in a inline fan halogen light kit in my shower. Here's all you need to know: http://www.fantech

...bathroom fan. When the timer dial is turned past the mark, the fan does not start. any suggestions? It's not the latest model. I don't know where the model number is located. It has a gold colored ...

Bathroom light/vent/heater switch with 3 separate controls I am trying to wire a light/vent/heater switch (3 separate controls) and find that the way I have it wired, I must have the light switch

replace an old bathroom exhaust fan with a Broan 680 fan/light. I am having a problem with the wiring. There are 2 wall switches for the light and fan. The existing wiring has red, black, white, and a

Nothing to attach a ground wire to. I am replacing a switch on my bathroom fan for a timer. What should I attach the ground wire to? ground wires are normally attached to the electrical conduit or box

...replace a fixtures (light, Ect) check the connection on that as wellHave an electrician come out and look for a short.If you can not find the solution, please have some one check it out. You don't ...

I am replacing my bathroom extractor fan which is a S & P 250/100 which has a timer with the silent version that does not have a timer. The old one has 4 wires red/blue/yellow/earth but the new on ...

light in my bathroom. The only thing that confuses me is the red wire that is attached to the unit itself. What if you do not have a red wire ran but there are still three switched using 14-2? The way

...bathroom broke, it didn't click when pulled and the light remained permanently on, it was fitted by a qualified electrician. I bought a new one and replaced the broken one, it worked fine a couple of ...