Whirlpool 5"x36" White Bathroom Drop-in Bathtub Spa Jet "controls jet tub turn water" Questions

Ad

floor? If it has holes or jets in the floor, the control box is bad and needs replaced. If it is a jetted tub, there may be a water level sensor, if so the sensor may be bad causing the tub to turn on

Ad

...in the system and the water goes out the air controls. solution: check the jets to make sure the jet faces are turned on and/or tell someone to quit plugging off the jets when they are in the

Ad

Question about Home

1 Answer

...them left or right. The other issue may be the water depth in the tub before you are turning it on. Make sure the water level is at least two inches or more above the highest jet. Rod US Parts ...

Question about Whirlpool Home

1 Answer

...tub and the jets didn't turn on. There is no instruction manual. First the obvious, most are electrically connected to a ground fault device, ether an outlet or a breaker. BEFORE ADDING WATER, check ...

Question about American Standard Home

1 Answer

...jet face. Sometimes if there are adjustable jets in the tub and they all get shut off, it will force the water that should be coming out of the jet faces back through the system and out the air ...

...turn them on. When I try to run the jets on my tub I get an error message that says Lo even when the sensor is covered with water. Can anyone help? This sounds to me like maybe the circuit that ...

Question about Home

1 Answer

...tub and causes the surging because the pump is pulling in too much air. try rotating the nozzle of the jet facing the suction away from it. point it another way. turn the air control knob closed and ...

Question about Maax Home

1 Answer

...tub into thinking it is full of water and put jets on, in manual says if purge cycle doesn't work reset breaker, is this breaker in basement (which I did), or a breaker in the electrical equipment of ...

Question about American Standard Home

1 Answer

...jet. It controls the amount of air coming out the jet when the tub is full of water and the motor is on. You should see the difference in swirling water turning it from right to left or the other way ...

...in tub, is this normal? not it is not normal for a jetted tub to turn on at any time. It sounds like there is a problem in the circuitry on the pump control box. what is the model number of the

Not finding what you are looking for?
Whirlpool 5"x36" White Bathroom Drop-in  Bathtub Spa Jet Logo

30 questions posted

Ask a Question

Usually answered in minutes!

Top Whirlpool Home Experts

john h

Level 3 Expert

29494 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66963 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Whirlpool Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...