Jacuzzi Bath Nova H530 917 Black Soaking Bath  "heat whirlpool tub" Questions

...tub contiunes to heat even when set on low temputure than everything shuts off when it gets above 110 degrees. It sounds like the problem is in the main control box. Since the tub shuts down after ...

...First, on the topside, is the heat indicator light on? If it is on and the tub is not heating then the temp sensor or the high limit sensor is not working and need to be replaced. US Parts ...

...tub. The bath heater you have is not designed to HEAT water - they only Maintain what you start with. You need to start the bathtub with the hot water you want. It will only heat about 1-2 degrees an ...

Jacuzzi tub. Runs pump. Turn on light or heat. Shuts down. Error # 188 What kind of controls do you have? Electronic it sounds like but do you have a model number of the control box under the tub?

...whirlpool tub with a heat exchanger conected. Touch pads usually have three wires connected to a low water sensor (two wires) all running into a control box with a circuit board inside. If you are in ...

...whirlpool hot tub, flashes Fl-1 has new filters, the pump and jets work good, even the air jets work, it is not heating the water though, please help?!!! Sounds like a bad heating element. This is ...

...tub the water won't heat. The thermostat on the unit is turned up, the indicator light is on, and the high limit reset isn't tripped. Any advice? Bathtub heaters will not produce the heat out a the ...

whirlpool modelz145, h240000 it keeps running on low never shuts off this just happened never did this before? Bad control board? Bad control board? Is this an outdoor hot tub? If it is an outdoor hot

...How can I trouble shoot this? the last time I looked at heaters for jacuzzi tubs they are designed to keep the water at the temperature you filled the tub and not heat up the water from cold to

...whirlpool jacuzzi tub with an Eljer inline heater. The pump in the tub is shooting water out all the jets I even blew the jets out with air to make sure they were clear. The first couple of times we ...