...outlet on the inside of a roman tub,if you have a 2 story house look for access panel on or by tub. otherwise you have to remove tile or other to access motor, you probably need a step too ...
Question about American Standard Home
access panel. The tub is located on a platform and surrounded by ceramic tile. I do not see an access panel. I'm prepared to remove tile but would like to know where (front of tub by faucets or sides)
...tub. is there anyway to cap the jet holes, so it is no longer a jetted bath? Hello, You should be able to remove the access panel and just disconnect, and cap the hose that is connected to the pump ...
...if that doesnt fix your problem remove the access panel to the mechanical space in your tub. there are generally one or two reset buttons in there which can also kick off and need to be
...tub or do I need to remove tile to get to it. I cannot reach the switch from the access panel depends on if you can get to the air button body. if you can get to it without removing the tile then you ...
...jetted tub makers no longer can use an electrical switch mounted at the surface of the tub, due to the possibility of contact with water (shock hazard). The best way to clear the tube of any water is ...
...jetted tub. The housing around the jet is broken. Jet still operates. I would like to get a replacement part. Any advice on where to get one? And how much? Of course, it's on the backside of ...
30 questions posted
Usually answered in minutes!
