Question about Whirlpool Home
floor? If it has holes or jets in the floor, the control box is bad and needs replaced. If it is a jetted tub, there may be a water level sensor, if so the sensor may be bad causing the tub to turn on
...jetted tub and the jets didn't turn on. There is no instruction manual. First the obvious, most are electrically connected to a ground fault device, ether an outlet or a breaker. BEFORE ADDING WATER, ...
water coming out of adjustable air vent behind wall of tub one or more of the jets are turned off. i would suspect someone is plugging the jets off which causes water to go backwards in the system and
...tub Back jets in the bottom position. If I turn up neck jet speed, that resets the back jets unless I press the down arrow on the neck jets first. Is this tub damaged? no it is not damaged. that is ...
...on the tub only 3 of 6 jets are working, 2 of them feel like they are trying to work. suggestions? Make sure the jets themselves are fully opened. Some models you can turn individual jets on & ...
...is only a year and half old and is in a vacation home/rarely used. The tub is built in, so access to the works is limited. Most of these jets turn to close. Check if you turn the nozzle. Hope it ...
Jets not working I have a Neptune jet tub. The motor turns on when I press on but there is NO air coming from the jets. What do I do? Check your breaker in the breaker box. Is this an air tub or a ...
...you for anwsering. Not normal for that to happen but the jet faces on the two back jets may be turned off or down. Try turning the face of the jet clockwise and see if you get more water flow
...turn the tub on before you get in. We did not receive an instruction manual with the tub when we bought it. Thanks Paul & Keri, Canada Some jets you can stick your finger into the jet its self and ...
...in 2000. so tub is 10 yrs old. please advise see if the jet faces turn at all. Sometimes the jets are adjustable to allow more pressure from some jets. turn the face of the jet and see what
15 questions posted
Usually answered in minutes!