Remote Start System  "change run time" Questions

...change the run time from the default 12 minutes to 24 minutes. I don't have the installation manual and the owner guide doesn't tell how. You MUST take it to your local professtional installers shop ...

...run time for Directed Electronics (Viper, Python, Clifford, Avital, etc) but, that does not mean that it is a DEI product. If it is a DEI product and you wish to change your runtime to 20 minutes, it ...

we just bought a 2004 vue with a viper remote start. it will try to start the engine 3 times without sucess it seem it does not crank the engine long enough can this be changed? not sure of the model ...

run, it I would first change fuel filter, then regulator if necessary You might want to take a look at a Haynes manual, as I believe there are two (2) fuel pumps in the Yukons and Suburbans. I had one

...run the starter for specific length of time, or for it to know that it started by the tach feedback. Check your users' manual. the bulldog brand remote starter does not need tach, it uses votage ...

...time it rains the truck wont start, no spark no fuel injectors, suspecting camshaft position sensor do you concur ? changed crank-shaft sensor. check for a crack in the coil, that vehicle should ...

...the remote it doesn't let the pre-heater run before it tries to start engine. You have to go into the programming options and change the wait time. There is usually a 7 second or 18 second wait ...

...change in pressure for several minuets of running time, a blown head gasket will cause it to pressure up quickly that may be your problem check cylinders for water, remove all the plugs and crank it ...

Remote starter does not work after the battery change. How to reprogram it? Audiovox ID:BGAAV2TF Turn key on and press valet button 3 times then press butoon on remote.Turn key of and thats it I have ...

...change the programing to "check voltage" to confirm run on ignition. Now the key chain beeps 3 times when I push start button. The system will not reset to default settings, nor will it reprogram the ...