Yamaha Motorcycles - Page 6 - Recent Questions, Troubleshooting & Support
I have a 2007 yamaha
Can you hear the fuel pump? If not then it will need to be replaced also check the fuel filter they will clog up some times. The other thing is check the fuses for the injection system. and you can also unplug the injectors and test for power at the injectioner.
Transmission noise under load xvs 1300 2008
Anyone who has this noise now, id put my money on the drive belt being slightly too loose, you'll notice the squeak more in the winter than summer, as in the summer the pulleys expand due to heat.
you can tighten the belt of its annoying, but come summer you may find your drive belt is overly tight.
2022 Wr450f No indicators at all or indicator light on dash either.
Question edited for lot more clarity.
Question moved from Cars and Trucks.
Yes LED Bulbs are problematic because the control boards in them call back EMF to the electronic control modules. Try disconnecting the battery for a couple of hours to reset everything. If that doesn't work it is still under warranty..
3/11/2023 5:55:43 PM •
Yamaha...
•
Answered
on Mar 11, 2023
Yamaha yz 125 kickstart wont move
If the kickstart won't move and the bike won't go into gear, it's likely that there's an issue with the transmission or engine. Here are a few possibilities to consider:
- Seized engine: If the engine seized while you were riding, it could be preventing the kickstart from moving. This could be caused by a lack of oil, overheating, or other issues. If the engine is seized, you will likely need to replace it or have it rebuilt.
- Transmission issue: It's possible that there's an issue with the transmission that's preventing the bike from going into gear and the kickstart from moving. This could be caused by a variety of issues, such as a broken shift fork or worn gears. You may need to have the transmission inspected and repaired.
- Top-end issue: If the bike lost a lot of power before cutting out, it's possible that there's an issue with the top end of the engine. This could be caused by worn piston rings, a damaged piston, or other issues. You may need to replace the top end of the engine to resolve this issue.
It's difficult to say for sure what the issue is without a more thorough inspection of the bike. I would recommend taking it to a mechanic who can diagnose the issue and provide a repair estimate.
2/26/2023 3:39:43 AM •
Yamaha...
•
Answered
on Feb 26, 2023
Lost key 2001 dt125
I havw a togglw switvh in plave of ignition .basic as it gets and affective
Not finding what you are looking for?