Motorcycles - Page 9 - Answered Questions & Fixed Issues
Bashan Bs49q-2 carburator where can I find one
If you take the Carburettor to a good motorcycle parts dealer they should be able to find you one that will match yours, even if it is one from a different manufacturer.
12/3/2023 2:46:19 PM •
Motorcycles
•
Answered
on Dec 03, 2023
•
31 views
Should the power valve honda nsr 250 cycle every time I turn the ignition on@
No, the power valve on a Honda NSR 250 should not cycle every time you turn the ignition. The power valve is typically actuated by engine RPM and throttle position, adjusting exhaust port timing for optimal performance. It may move during engine operation but not necessarily during every ignition cycle, depending on operating conditions. You can buy new model bikes there are many new option available but first calculate your earnings stats on check here.
Where is air/fuel screw on a suzuki vs 800 intruder
The air/fuel mixture screw on a Suzuki VS800 Intruder is typically located on the carburetor. To adjust the air/fuel mixture, you'll need to locate the carburetor and look for a small screw that can be turned.
Keep in mind that the exact location of the screw may vary slightly depending on the model year and specific carburetor version on your VS800 Intruder. Generally, it is located on the bottom or side of the carburetor.
Here are the general steps to locate and adjust the air/fuel mixture screw:
1. Locate the Carburetor: The carburetor is usually positioned on the side or underside of the engine. Follow the intake manifold or air filter housing to find the carburetor.
2. Identify the Air/Fuel Screw: Look for a small screw on the carburetor. This screw is typically flat-headed and may be recessed. It is often located near the bottom of the carburetor.
3.Adjustment: With the engine running at idle, use a screwdriver to turn the air/fuel mixture screw. Turning it clockwise (in) usually leans out the mixture, while turning it counterclockwise (out) enriches the mixture.
4. Listen to the Engine: As you make adjustments, listen to the engine's sound. The goal is to find the point where the engine runs smoothly and the idle is stable.
5. Fine-Tune: Make small adjustments and give the engine a moment to respond before making further changes. It's a process of trial and error to find the optimal setting.
6. Check the Owner's Manual: Refer to your motorcycle's owner's manual for specific guidance on the location and adjustment of the air/fuel mixture screw. The manual will provide information tailored to your bike's make and model.
If you're uncomfortable making these adjustments yourself or if you're unsure about the location of the screw, it's advisable to consult a professional mechanic or refer to the specific service manual for your Suzuki VS800 Intruder.
11/14/2023 2:14:48 PM •
Suzuki...
•
Answered
on Nov 14, 2023
•
63 views
Not finding what you are looking for?
