Question about 2003 kawasaki KX 125
How do I change a head gasket on a kx 125, it throws out water on kickstarting it from the radiator,... its the gasket im told so is it similar to a car... drain oil an water ... use gasket sealer??? not sure...... can anyone help me, please. @
Hi, Nickjupp for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Head Gasket Replacement You use sealer
2000 KX125 Part 10 Replacing Piston Rings Gaskets
OEM Parts for Kawasaki
2003 Kawasaki KX125 Owner Manual
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e
Posted on Mar 02, 2018
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
hi first off you must remove all the water as soon as possible as corrosion will occure very quickly on the big end and main bearings thus you will have to strip the engine to replace them so the quicker you remove the water the better, it may be when you removed the head the water that was inside the water jackets has gone inside the engine, however you do have a base gasket under the barrel that may have torn and leaked water into the engine, it would be best if you drain all the water out before you start removing the barrel, remove the piston by removing a circlip and tapping the gugeon pin out carefully remove the small end bearing, dry this and oil it, once all this is done useing compresed air blow out the water, if no air is availabe turn the engine upside down and alow water to run out, use some wd40 and engine oil to get around the bearings and remove the exsess oil when happy all is lubricated, when replacing piston ensure correct fitment arow facing exhaust port, if no arowlocate the piston rings in corect position and fit with the locating pins at the rear, any questions ,paul
Posted on Jan 19, 2011
Tips for a great answer:
Mar 09, 2016 | 2003 kawasaki KX 125
Apr 20, 2014 | 2003 kawasaki KX 125
Jan 27, 2014 | 2003 kawasaki KX 125
May 28, 2012 | 2003 kawasaki KX 250
May 23, 2012 | 2003 kawasaki KX 125
Jan 24, 2010 | 2003 kawasaki KX 125
Jan 03, 2010 | 2003 kawasaki KX 125
Sep 10, 2009 | 2004 kawasaki KX 125
Apr 05, 2009 | 2003 kawasaki KX 125
110 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: