1989 Honda GL 1500 Gold Wing Logo
Posted on Jul 25, 2011
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

1989 Honda gold wing 1500 // I am two days into my vacation and am loosing clutch lever resistance and there is fluid under the triple tree. Thane anyone don

1 Answer

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

Novelist:

An expert who has written 50 answers of more than 400 characters.

  • Expert 172 Answers
  • Posted on Jul 25, 2011
Anonymous
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

Novelist:

An expert who has written 50 answers of more than 400 characters.

Joined: Feb 13, 2009
Answers
172
Questions
0
Helped
176606
Points
467

Sounds to me like you have a leak in your hydraulic clutch system. Your clutch lever will start to feel odd as (1) fluid leaks out, reducing pressure; and (2) less pressure reaches critical areas because pressure over a certain level is squirting fluid out of the system.

Leaks like these are often caused by one of two things: (1) a hydraulic line that has sprung a leak; or (2) a leaking / cracked fluid reservoir on your clutch slave cylinder. I am discounting the possibility that the slave cylinder itself is going bad, as that wouldn't create fluid leaks external to the system.

To troubleshoot your system, top off the fluid reservoir and then squeeze the clutch lever repeatedly while looking closely to see where fluid may be leaking out. MAKE SURE YOU'RE WEARING GLASSES OR PROTECTIVE GOGGLES WHEN YOU DO THIS!! A pinhole leak in a hydraulic line can shoot out a thin but forceful jet of fluid, and that's really nasty stuff to get into your eyes (it's bad enough on your skin or on the painted surfaces of your bike). The leak won't dribble all the time, only when you're applying pressure, which is why you'll need to keep working the clutch lever while you're looking for leaks. The location of the leak will tell you a lot.

Though I can't see your bike, I'm leaning towards the idea that a hose or, more specifically, the metal end of the hose, is leaking fluid under pressure. If this is the case, you should be able to obtain a replacement hose/line from a Honda dealer and swap it out without too much of a bother. If you're in the middle of nowhere and can't get to a Honda dealer, it's also possible that a hose shop could fabricate a custom line for you if you're able to show them your old hose.

On the other hand, if you have a cracked reservoir, you most likely will have to replace the entire clutch actuating assembly (slave cylinder? clutch cylinder?). That part should be relatively exposed--it may be mounted to the handlebars out in plain view; you won't have to mess with the actual clutch inside the transmission. Because of the location where fuel is puddling, though, I think this is less likely than a hose / hose connection problem.

Good luck, and I hope this doesn't spoil your vacation!

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

My 1989 honda gl 1500 gold wing wont start in cold weather, it cranks over

Mine does the same thing. I put a new gel battery with high cold cranking amps from Advanced Auto Parts. Look to spend 100 bucks. Choke at full choke and it starts right up now. Gold Wings are cold natured. I own 2 and both are. But the battery took care of the cold starts.
1helpful
1answer

HI IM HAVEING ON ISSUE WITH BLEEDING MY CLUTCH

You probably have air in your master cylinder. Lay plastic and rags under your clutch master cylinder to protect the cycle from DOT 3/4 brake fluid. Try loosening the banjo bolt holding the clutch hose to the mastercylinder, now pump the lever 2 to 4 times till a gush of fluid leaks past the sealing washers. The clutch master is now burped, tighten the banjo bolt and bleed the system.
Not finding what you are looking for?

171 views

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...