No display from the server mother board, Model hp proliant ml 350 how to solved it. Biswajit

You may need raid controller driver for HP proliant ml 350. Copy raid controller driver in flopy disc, insert it in flopy drive, insert cd in cd driver, boot server from cd and start installation process, as soon as you see Press F6 if you need to install third party scsi drivers or raid controller, press F6 and follow the instruction. It will then ask you to select RAID driver file and then will continue to windows xp installation.

Regards,
Kaushik Patel

Check BIOS for boot sequence. CD-ROM / DVD should be 1st.

Drive about to fail.

use minus screw driver. I opened it with the same :)

WHICJ COUNTRY YOU WANT IT IN? NEW OR USED? PLS REPLY

windows server 2003 enterprise edition with SP1 or SP2 , can detect
SCSI driver automatically.

instead of using the KVM use ILO or a local keyboard monitor and mouse. Also try restarting the KVM module before powering up the server

server hung problem

Remove all the cards except dispaly from the slots,disconnect all  hdds and start the server in minimum hardware and check.reset bios .Is there any LEDs in the mother board is glowing amber or red colour??Please try these diagnostics.

Open the system cover and check whether any LEDs showing amber or Red colour