When do i change the belt? miles? - 2005 Kymco Grand Dink 250

2004 ?? then timing belt should be good for at least 100,000 miles

Drive belts are replaced every 5 years

Your thinking of timing belts 80,000 miles

For most all timing belts, the 100,000 mile marker is when the belt should be changed. The belts are designed to work for 100+ thousand miles, but recommended checking/changing is at 100K miles.

It ranges from 40,000 Miles on up. A visual inspection showing cracks in the belt mean immediate change regardless of miles. Some recommend 50,000 mile intervals and as the belts improve in materials. some go longer than that.

The damage that can be prevented by keeping fresh belts on the car is worth the extra belt change over 10's of thousands of miles. Really easy to consider to do 2 changes in 100,000 miles or 3 changes in 100,000 -120,000 miles. You are talking an extra $25 to not break down, trash a radiator, tear up A/C and Radiator lines, or blow an engine. Cheap Insurance.

Every 90,000 miles. would be sufficiant.

It has a timing belt. Recommended to be replace every 105,000 miles, timing belt also run's your water pump good idea to also replace, your engine is also an INTERFERENCE ENGINE which will damage your cylinder head valve's if timing belt goes bad. Hope this was very helpful.

200,000-300,000 miles if you keep up with oil changes and belt changes especially the timing belt this is usually the most important belt if it brakes you'll need a new engine. Change this belt around 80-100,000 miles.

Provided the belt that is to be used is a high quality belt such as a Gates brand the belt can safely last for 80,000 to 90,000 miles before needing to be changed. As for the original belt usually for hondas it's 100,000 miles Toyotas about the same 100,000 to 110,000 miles, check with your local dealership's service department for you cars original belt Suzukis and kias are about 90,000 miles.

Hello mike_potts07: My name is Roger and I will answer your question. The suggested miles to change your timing belt is 60,000 miles. This is manufacturers recommended service interval. Also this motor is an interference motor. What that means is if the timing belt breaks. The valves in the head will be hit by the pistons. This will bend all valves that are open at that time.
Should you need further help please just ask. Please rate the answer you received. This way we can tell the information was helpful. Thank You for using Fix Ya. Roger

Timing belt should be changed at 100000 miles