My fuel injected harley will not prime itself as usual when i turn the switch on...yes it has fuel in the tank what can i do? someone told not to twist the throttle ....too late!! what can i do to reverse that?

SOURCE: removing gas tank on harley flhtci

remove seat, remove console on top of tank, disconnect wiring from console to tank, disconnect vent line if present, disconnect fuel line on tank, disconnect fuel gauge (up under tank on left side, 3 wires, 4 wire connector, wires are yellow, orange, and black), remove bolt at rear of tank, remove two side bolts up front under tank (coil bracket is there also, carefully cut clamp on cross over hose located up front under tank.
This works better with three hands remove one side of cross over hose, fuel will flow freely so the extra hands are good at "plugging" the hose and the tank. Gently remove tank tilting front of tank as much as you can till you get it clear of the frame, while still tilted at a steep angle put the cross over hose back on.
To make things easier drain all fuel out of tank before reversing the process to reinstall tank. Hope this helps.

JP