2001 Harley Davidson FXDL Dyna Low Rider Logo
Posted on Dec 06, 2010

Think I blew a fuse when I was jump starting my battery. Speedometer, horn & turn signals dont work. Replaced the battery but that didn't resolve the problem. Is there a fuse box anywhere? I checked the in-line fuses under the seat and they look OK.

5 Related Answers

Anonymous

  • 420 Answers
  • Posted on Apr 08, 2009

SOURCE: '06 Harley Davidson FXDI35 Speedometer and Accessories Don't Work

Check for coroson on all the conectors.

Ad
OneRide

Gar

  • 384 Answers
  • Posted on May 02, 2009

SOURCE: left turn signal an speedometer

There was a recall on the speedometers about 2004.
Some were defective and just quit working. H-D replaced them for free. Not sure about your year/model, but I would contact a dealer or area service rep to see if it falls under the guidelines.

Anonymous

  • 80 Answers
  • Posted on Jun 06, 2009

SOURCE: Speedo, turn signals, brake lights, horn stopped working. All else is fine.

Gap your plugs to 38 thou. Check all your bulbs (one burned out will affect the rest) Take a look at all your fuses and make sure they are all ok. Otherwise you are probably looking at a wiring short which will require trouble shooting of the elctrical system. Buy your self a service manual for your bike, this will help you a lot.

Anonymous

  • 269 Answers
  • Posted on Aug 19, 2009

SOURCE: accessory fuse keeps blowing, headlight not working

I know this sounds aomewhat general, however please give the following some thought:
Check your relays, if you have an aftermarket horn you may have a different relay. To troubleshoot unplug your headlight, unplug your horn, etc.. Turn your ignition switch to accessory only. See if the fuse pops. If it does unplug whatever added accessories you may have still have plugged in. Once you can get the fuse to stop popping, turn the ignition switch to on. Then one at a time plug you accessory, headlight, etc. back in. When you find what pops the fuse, unplug that item, start plugging in the other items, if the fuse has not popped you have potentially isolated the circuit causing the issue. Now check the wiring for loose connections, bad ground, and CHECK the relay if that item has one. Hope this helps,

JP

Anonymous

  • 314 Answers
  • Posted on Mar 18, 2010

SOURCE: Leftside speedometer light out,turn signals,and

Try your fuses first .you may be right and they have blown.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer
0helpful
1answer

Honda metropolitan 05 Met II blowing 15 amp fuse

Did the scooter start OK when you first started it after bringing it out of storage, or did you have to use the kick starter? Maybe the battery is faulty and is pulling a lot of power.
Check the charge rate with an ammeter (use a multimeter that can measure 20 Amps DC) and see if the current exceeds the 15A rating of the fuse. If it does, replace the battery.
0helpful
1answer

1992 Yamaha XJ 600 Diversion S right turn signal not working

Hi, try to check cables in a front light due to wearing out of a isolation. My case. Take care, Tom
0helpful
1answer

My 1997 buick lesabre keeps blowing fuses. first it blew the turn signal fuse which is a 20 amp replaced it with a 20 and it blew when i turned on the signal. put in a 25 to see if it would work and it...

I strongly suggest your first priority will be to discover why your tail lights are seemingly consuming many times more current than they should. A 30 amp fuse has less resistance than a 10 amp though the difference is hardly measurable.

I suspect when that is sorted out the other faults could disappear without further effort.

It is time to find a circuit diagram and to trace the tail light wiring from the supply to the lamps in order to discover what went wrong.
1helpful
1answer

I replaced the turn signal switch on my 93 chevy s10 and when i went to put it all back together, i broke the horn contact ring putting on the steering wheel. When I reconnected the battery, the horn...

the little contact could have bent and is sitting on the ring, you may have to bend it so it only makes contact when you push on the horn pad. things should fit easily if the force it things can get bent out of their original shape and cause issues.
0helpful
1answer

My dad jumped his work truck with my 99ford escort zk2 and I think that he hook the pos to the neg. Well all the bulbs blew and the windshield wipers run non stop when fuse is in. Have everything fixed...

check all the fuses with a meter , not just by sight, then, look under the hood for the fuse block there, check those fuses also, especially the main fuses, 30 amp and above,, with any luck he didn't blow out your computer
0helpful
1answer
Not finding what you are looking for?

293 views

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...