Hi i have a 2001 flstc hst heritage #46?140 made with factory paint job.Anyway i recently purchased the bike but only had 1 alarm fob ,i went down to the dealer bought a new fob but thr dealer could not porgram the new fob with the current one,there is a Dyna eletric pack on the bike and the dealer wants to look at the bike but i,m afraid that will be too expensive.The current fob works fine and its not the battery in the fob, the dealer said it could be because my bike battery was low ,anyway at the moment i,m charging the battery.I tried the standard on-off,on-off-on ,then twice on the left light switch and once on the right but no pin number showed up on the oddometer, and do i do the above sequence after i disarm the alarm .THe dealer did the above sequence then pressed my orriginal fob, followed by the new one, was he arming or disarming the system?he said the new fob should pick up a signal from the alarm system can you help me set the new fob please brian g

SOURCE: How do you arm the factory security system?

push the button twice to dissarm the system, it will arm itself after about 30 seconds you should be able to see that its armed by the indicators flashing or if you have a siren fitted it will chirp twice . this function can removed but it will automatically self arm
hope this helps
kind regards
bert31000

SOURCE: 2003 Dyna FXWG low battery?

sounds like the alarm is set and wont let the ignition work

Ed

• 479 Answers
• Posted on Apr 13, 2009

SOURCE: Cannot start my 2004 Sportster 1200 Custom due to security system

Check the battery, try jump starting it with another battery. If the battery voltage drops too low, i believe the alarm default is to disble the bike. (Greasy little criminals will cut battery cables to disarm the alarm) so although you may have enough power to operate the lights and alarm, it may be droppoing too low to start.

SOURCE: 2007 VRSCDX Alarm system "key" icon is on while riding

Got a feeling guy installing xtra lites didn't do a good job grounding his new installation...if the alarm is working fine now then don't worry about the alarm....recheck his work and rig up an extra ground wire if need be....good luck to you friend.....tim

SOURCE: 2007 harley softail turn signals left side stoped

More than likely a broken wire you will have to trace