SOURCE: how do i access the battery on my yamaha xjr 1300 2001 model?
if your bike is similar to an fj,you should lift the seat and battery is underneath in its own compartment to remove it,undo the rubber retaining strap the terminals and breather tube,battery lifts out vertically
SOURCE: FOR Yamaha XF50 model Yamaha c3 scooter stolen ignition wires cut
Just pick up some wire connector unions with some shrink wrap.,Identify first the identical matching wire colors (each wire will have a color, example: red with a white strip connects to the other red with white strip etc.) do this to all the wires being sure to slide a length of shrink tube up over one side of the wire before crimping the connector with the two ajoining wires together then slide the tube over the wire crimp connector and use a lighter or heat gun to heat the rubber shrink tube to seal the connector. Do this to all the cut wires one at a time until all are joined together withe union crimping connector method. Be sure you positively identify the color of the wire and its backround stripe color along with the other identical wire that it needs to connect to, you don't want to hook the wires up wrong it could burn something out be caareful and positive the color patterns on the wires to be unioned are identical if you do you will be alright in this job.
SOURCE: i own a yamaha xjr 1200 sp 1998,rear brake light not working
The rear brake stoplight switch will have un-adjusted itself. Find the stoplight switch which is near the rear brake fluid reservoir just aft of the right hand side panel. The black plastic adjustment nut is on top of the switch body. Turn the nut clockwise until the brake light comes on when the footbrake pedal is depressed.
SOURCE: What are the tyre pressures
Usually if you look closely, it is written on the tyre side wall. But just in case it isn't, try 34psi for the rear, and about 32psi for the front. You can give or take a few PSI, if you want a softer ride down to 30psi.
340 views
Usually answered in minutes!
×