SOURCE: How do I remove and replace battery on 04 1200 sportster custom?
all you need to do is remove the battery side compartment - pull from the top, and there is a hinge on the bottom. Then unscrew the negative connector -first. Then the positive. Remove the screws for the holder and its done. The new battery will have a moderate charge. You should buy a battery tender and use it to charge it. Also a battery tender will help keep the battery ready to go when you are.
SOURCE: How do I remove the battery on my
Remove cover panel. Disconnect posotive and negative wires if possible without removing battery cover. Remove battery cover and pull battery out towards you and up.
SOURCE: How do I remove the negative battery cable to
You can charge the battery without removing the battery. Find the large cable that comes from the battery where it connects to the starter. Connect you positive charger clamp there. Connect the negative charger clamp to any good frame ground on the bike. You can charge you battery using this method provided you battery charger clamps are not too big.
If you can't do this, you'll have to take the seat off the bike, remove the battery hold down strap, and then move the battery outwards so you can disconnect the negative battery cable.
Good Luck
Steve
180 views
Usually answered in minutes!
×