I have a kawasaki zx6r 1997 and i bought a set of vaccum gauges, i would like to know what mark on the gauges i go to before they are tuned into propperly..... thank you

This is all I could find in my service documents. Hope this helps.

batt could be slightly weak-maybe at 12.4volts--test it for 12.6 the standard------chec connections---------also carbs cud need pro cleanin and ajust

The kawasaki manual recommends less than 2.7kpa between any two cylnders

Depends if the oil and filter and oil cooler have been dismantled. If not and only the old oil has been drained it should be approx 4lr's, should state this under the oil filler as a guide. If its a complete strip down and rebuild your'll need at least 4.5ltr - 5ltr's so put in 4.5 and run for 5 mins, then check level

search google for kawasaki forums. you should join one or two and ask the same question. Someone there, who has direct experience, will know if it fits or not.

when i ride my bike and i crack down on it it boggs down its a 96 zx6r

check your fuses