Question about 1998 kawasaki ZX-6R Ninja
The bike starts but stalls when the starter but is released @
Hi, Mitzy10261 for more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
ZX6R J1 Starts but dies after few seconds running Page 1 Biker Banter...
Kawasaki NINJA ZX6R My bike won start Starter problem or discharged battery
Kawasaki Ninja ZX 6R 1995 2002 Service Repair Factory Manual Download... $15
OEM Parts for Kawasaki
Kawasaki Ninja Owners Manuals
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e
Posted on Mar 24, 2018
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Check for spark and fuel. The spark should be blueish-white and consistently flashing. If the ark is dull-orange and/or inconsistent then there is a problem. the fuel should flow freely from the pet-****, through the needle and seat, and past the primary and secondary jets. There are other things that can cause this problem, check the intake manifold gasket, spark plug, wire, water in the gas, and so on. well good luck.
Posted on May 12, 2009
Obviously the CDI is picking up power from the starter button. Check the ignition key switch for proper operation. Chances are that whatever fried the loom also fried part of the switch. Alternate to that, trace the wire powering the CDI system, disconnect it at the source (starter button connection), then find a power source that is live only when the key is turned on and then hook the CDI wire up there.
an I get a “very helpful” rating on this answer?
Posted on Aug 18, 2009
SOURCE: i have a 1993 Suzuki
This seems to be that the engine gets STARVED when it is warm . So in the first place you need to check the fuel flow to confirm if the temperature relativity is confirmed. Check the fuel flow to the carburator, check the settings of the fuel / air mixture. Initially set the carburator to normal settings and then fine tune when the engine runs evenly . If not check the plugs when the engine stalls which will indicate an OVERFLOW or a burnt plug which indicates a good firing.
If there is an overflow detected then it can be related to LOSS of spark when the engine warms up. So check the spark timings on the plug, the intensity of the spark. the voltages on the coil must be good, a positive steady on the + side of the coil and a pulsating voltage on the negative.
If coil is bad, specially failure of insulation then the intensity can drop to no spark after the coil works. So this also must be checked.check the spark gap.
Finally the engine must be tuned and timed after it runs smoothly.
Posted on Jul 07, 2011
Tips for a great answer:
Apr 26, 2014 | 1995 kawasaki ZX-6R Ninja
Apr 09, 2014 | 1998 kawasaki ZX-6R Ninja
Mar 19, 2014 | 2001 kawasaki ZX-6R Ninja
Jan 16, 2014 | 2001 kawasaki ZX-6R Ninja
Nov 23, 2013 | 1997 kawasaki ZX-6R Ninja
Apr 30, 2013 | 1999 kawasaki ZX-6R Ninja
Oct 20, 2010 | 1996 kawasaki ZX-6R Ninja
Aug 20, 2010 | 1998 kawasaki ZX-6R Ninja
Jun 11, 2010 | 1999 kawasaki ZX-6R Ninja
48 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: