2001 kawasaki ZX-12R Logo

Related Topics:

Posted on Jul 31, 2010
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Neutral light off but motor is in neutral , bike won't start

2001 ZX12R ,neutral light off but motor is in neutral , bike won't start .
Push start works and engine runs smooth,but after switching off engine it's the same problem

1 Answer

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

New Friend:

An expert that has 1 follower.

Teacher:

An expert who has written 2 tips or uploaded 1 video tip.

  • Expert 67 Answers
  • Posted on Aug 18, 2010
Anonymous
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

New Friend:

An expert that has 1 follower.

Teacher:

An expert who has written 2 tips or uploaded 1 video tip.

Joined: Aug 17, 2010
Answers
67
Questions
1
Helped
24343
Points
132

Check your stand safety switch. Or your gear sensor. One of these is guilty!!!

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Why doesn't engine turn over?

Check the battery.Is it charged?Also does the neutral light go on?
If not check the neutral switch.
The neutral switch is behind the engine case near the rear shock and has one wire. Make sure the bike is in neutral or on stands. Remove the one wire and put it to earth/chassis/ground (somewhere metal on the bike). The neutral light should come on and you should be able to start the bike if that was the problem.
0helpful
1answer

Buell blast won't start

You have a bad switch somewhere - either the clutch switch in the clutch lever or the kickstand switch is bad. Of course I had a blast that had a sloppy connector at the back of the key switch that did all of the above too.
0helpful
1answer

My bike won't start(lights light ,horn works push starter button nothing no power to spark plugs ??? i belive one of the starter interlocks must be stuck in an open position possibly?

Hey, When that happened to me I took the bike half apart and it ended up being the Kill switch. Try rocking it back and forth also if you have contact cleaner flood the switch and let it dry then give it a light spray of wd-40. also check the start switch to be sure it is making contact,bike is in Neutral and the kick stand switch is also working.
2helpful
3answers

A problem starting up

Check the fuses. Next, check for spark. If no spark then check again but with a new plug. Is the kill switch on? Does the side stand have a kill switch? Is it working properly? Tip-over kill switch on your bike? Check the operation of the ignition switch and all kill switches with a volt ohmmeter.

Check the loom. Did a wire come unplugged? Are all wires clean and with solid connections? Any abraded or pinched wires? Is the bike in neutral and the neutral light is lit up? If no neutral light, check the neutral switch and neutral switch wire on center casing. With a little luck this will get you back on the road.

Please rate this answer. Thanks
Not finding what you are looking for?

586 views

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Bob G

Level 2 Expert

104 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...