I get a rattle or tick or vibration when i turn-98 bick park ave

In order to put your new door handle on your vehicle you have to take the inner panel off, then disconnect the screws and pins to replace. Be sure to put everything back the way it was so you don't get any rattles.-----------------------------------------------------------------------------------------
BENZ STAR C3

If it pulls to the left,then the right side is not applying
equal pressure.

What if you command the abs open & drive with scan
tool

should be a lable under the hood. if not, search serpentine belt routing 98 park ave on google images. should pop right up

Hi you may have a poor earth connection to the lights or a wire from the lights is touching the car body or another wire.

Was the relay switch new that you replaced? the one behind the dash?

Regards
Dan

cv joint bad

oxygen sensor in exhaust

possibly your ball joints, or a wheel bearing starting to go

If the left side still works, its not the blinker relay, the thing you hear ticking. Both left and right signals go through the same signal stat. Turn on your hazard flashers and make sure the bulbs on both the left and right side come on. If the do, you may have a problem with the turn signal switch on the steering column itself. If only the left comes on, it could be bad bulbs on the right side or a wiring issue. Wiring issues are more rare on Park Aves.

its a dead battery

*** 91 park ave with delco bose =

black = ground
dark green = lights on input
grey = panel lights
pink = on input
yellow = power input
orange = battery power input

nca = shield ground
tan = left fr spkr +
orange/black = left & right spkr -neg
lite green = right fr spkr +

nca = shield ground
dark blue = right rear spkr +
dark green/yellow = right & left spkr - neg
brown = left rear spkr +

purple/white = display dim output
pink = vehicle speed input
-----------------------------------------------------------------------
**** 91 park ave without delco bose =

purple/white = display dim output
pink = vehicle speed input

grey = left front - neg
tan = left front + pos
dark green = right front - neg
light green = right front + pos

black = ground
dark green = display dim signal
grey = panel lights
pink = power antanna
yellow = ign input
orange = battery power
light blue = right rear - neg
dark blue = right rear + pos
yellow = left rear - neg
brown = left rear + pos .

there YA go