35 foot pounds.
Sorry, I sent you the specs for a car.... here is a bunch of torque specs for you!!!!
Engine mounting bolts
1992-1996
upper...43Nm (31ft-lbs)
lower...65 Nm (47ft-lbs)
Engine hanger plate bolts
1994 on....40Nm (29ft-lbs)
Cylinder head nuts
1994-1996.....28Nm (21ft-lbs)
Cylinder nuts
1989 on....40 Nm (29ft-lbs)
Cylinder studs...12 Nm (84-120in-lbs)
Honda power port cover bolts....10Nm (84in-lbs)
reed valve case bolts...not specified
Right crankcase cover bolts..10Nm
Clutch cover bolts..10Nm
Clutch pressure plate bolts...10Nm
Clutch locknut
1990-1996...82Nm (60ft-lbs)
Primary drive gear bolt
1995 on.....65Nm (47ft-lbs)
Shift drum center pin..22Nm (16ft-lbs) *
Shift drum stopper arm bolt...12Nm (108in-lbs)
Kickstarter pedal bolt
1986-2000.....27Nm (20ft-lbs)
Shift pedal pinch bolt
1992-1996...not specified (but 86-91 is 18-25Nm or13-18ftlbs)
Crankcase bolts.... not specified
Countershaft bearing retainer plate bolts....10Nm (84in-lbs) *
*(apply non-permanent thread locking agent to threads)
×
643 views
Usually answered in minutes!
×