Yamaha dragstar 1100 fork repair diagram to dismantel
SOURCE: problem with shaft drive (cardan) for my Yamaha Dragstar
SKU: 5FB-Y4617-00-00
SHAFT DRIVE SUB ASSY
SKU: 5FB-Y4617-00-00
SHAFT DRIVE SUB ASSY
Hi i just checked on stadium yamaha site and above is the SKU # for both, 98 and 03.... both the same so go for it
http://www.stadiumyamaha.com/pages/parts/viewbybrand/parts.aspx
SOURCE: have problems starting yamaha xvs 1100 dragstar
Hi there fellow XVS dragstar owner!
I had the same problem before. It is usually caused by the wrong jets installed. have it Replaced with the standard jets that came with it... this will solve the problem on acceleration. Make sure the fuel and air mixture knob is set to 2.5 turns-out from full close. clean the spark plugs.. better, replace it with a new one to ensure clean burning of fuel. also, use unleaded gas. this burns better.
hope this helps
-levibit-
SOURCE: I need a fuel hose routing diagram for a Yamaha Waveraider 1100
http://www.boats.net/parts/search/Yamaha/WaveRunner/1996/RA1100U%20WAVE%20RAIDER%201100/parts.html
Testimonial: "Just exactly what I needed. Thank you."
SOURCE: 1999 yamaha dragstar paint
Go to a local FinishMaster store and they will use a color eye to find u a color
SOURCE: 1100 Dragstar Fitting Straight Pipes
We have changed a few bikes from standard pipes to drag pipes. Their is a few considerations here, sea level or at what altitude, how much back pressure. so my suggestion rather take it before fitting the pipes to someone with a dyno, run and record the test, then have the pipes fitted, and let the same shop to the test again on there dyno, they will then know what to do with the jetting, because you should achieve better results with your new pipes.
208 views
Usually answered in minutes!
×