Both brake and running lights are on when key is in the on position for a 1994 Sukuzi DR650 Enduro. The ignition has a running light only circuit and it only illuminates the running light. so they aren't shorted together somewhere... I am DESPERATELY trying to find a schematic for this bike. Both handle and foot switches work as they should (multimeter verified)
SOURCE: brake light does not work
remove the bulbs step on the brake and ck for power at the terminals inside the socket if no power back track the wires and look for a break in the wires.use a didgital volt meter and ck for continuity through the switches( unplug the switch and put the probes to both terminals one on each the meter should beep ---switch good.........
no beep switch bad) also ck the bk. light relay ,not sure where it is at....more extensive problem ??? the dealer sells service the manual with all the wireing diadrams and locations of the components all u need to fix any thing on u bike .....my 82 honda saber had lots of electrical prob's & lighting prob,s i bought the service manual and fixed every thing... saved me hundreds o $$$$$$$$$$$$
let me know
SOURCE: Suzuki VL intruder 125 back brake sticking and braklight stuck on
i too had this problem .....dnt worry just remove the brake cable and lubricate it with some spray like ABRO or WD40 lubricating spray then you sprayed some in the cable.play with it pull it forward and push it backward.,lubricate and repeat the steps till you find the cable goes smoother...you know it usually happens due to dust and dirt which enters the cable n get it stuck,try this n tell me..
SOURCE: 2008 GSX-R 600 Ignition Switch Removal and Replace
You will need to remove the gas tank, air box, and possibly some hoses to get to the plug. Not a hard task, just time consuming on a newer bike.
SOURCE: just bought a 2001 vs800 intruder,got it home and will not start
If you're getting no lights then it is either the ignition switch or the battery is not making connection. Check the battery with a multi-meter. Check the fusebox with a multi-meter, any power to any fuses there with key on?
SOURCE: Brake light does not always work with front brake - Ninja 250
Check the wiring connections to the front brake switch. If all OK, then it could be the switch.
209 views
Usually answered in minutes!
×