How do you lower front forks on a 1996 fzr 600 yamaha?

Murtaza Akberali Versi

• 767 Answers
• Posted on Jan 28, 2010

SOURCE: Yamaha xj 900 s Front fork oil amount in cm

The forks hold 286ml or 9.67 US OZ of oil, best would be to use hydraulic oil.
Good Luck.

SOURCE: 1994 Yamaha fzr 600 speedometer not working.

speed odometer cable needs to be replaced

SOURCE: 1994 yamaha fzr 600 spark plugs foul after about

Really...strange what you need to do is see if the bike is running too fat. So...warm her up witha fresh set of NGK! spark plugs. After the bike is warm take it down the street and back. When your on the way back get on the throttle and accelerate then shut er down and coast it into the garage. This will give an acuurate read on the spark plugs at operating temperature and under a load. Pull all the plugs. If they are brown like coffee with cream that means carbs are adjusted correctly. If they are black and wet too rich and if they are white or very light brown too lean. Other problems may be oil soaked plugs from loose top end parts. Maybe valves or guides.

SOURCE: Fork seal replacement

Did you try taking down the fork seal and cleaning out with wd/40 and a piece of 30mm film? You should always try this first. The seals rarely go bad. There's probably just a vary small rock holdeing it open and the film will dislodge it the wd is just to help things along.

SOURCE: fork oil capacity for yamaha 600 diversion

Hi,did my mates last week,used 350ml per leg.