SOURCE: Road King Custom 05 tightening down the handbars
Use a pocket knife to lift the nut and screw caps. They just press in with thumb pressure.
SOURCE: Road King Custom 05 tightening down the handbars
I also have an 05 Road King Custom. You have to remove the cover where the key fits to lock the forks, then remove the headlight and remove the screws from inside the housing to gain access to the handlebar bolts.
Big John
SOURCE: can i bypass the security system on a 2005 road
If you do not have the key fob that came with the bike (security system) then go to a dealer to have them reset it and get the key fob for it
SOURCE: I have an 06 Road King Police and the other day
Speedo sensor is magnetic,probably clogged with metal shavings,remove and clean thoroughly
SOURCE: I have a 05 road king custom, Im doing my forst
The filters should be the same.
Make sure you have a new o-ring for the oil plug.
Make sure you properly ID the oil plug, there are two under there, one is oil, other is trans.
Don't overfill oil.
Don't over-tighten oil plug on re-installation, the aluminum threads are notorious for pulling out. Oil ring does the seal, snugly tight, don't put all you have into it.
237 views
Usually answered in minutes!
any buttons around the clock? try pressing, and holding different buttons?
×