Will 2001 zx9r fairings fit the 1998 zx9r????

Here is a link to videos on UTUBE that you can watch . Hope this is helpful !!!! Grant

https://www.youtube.com/results?search_query=How+replace%2C+locate+and+access+battery+on+kawasaki+ninja+ZX9R+2001%3F

in my experience the 2000 fairing is different including the front headlight bracket the 1999 will fit cheers

i looked up one of the fairings on the parts fiche and it it shows that 98-01 are the same except for the color. i just looked up one long skinny piece. everywhere that sells them says 1998-1999 are the same and 2000-2001 are the same. not sure what the difference is but you could probably make it work...

Check the NGK online application catalogue; the recommended gap is listed in the application for your vehicle.

YES YOU DO

My workshop manual covers the one model from 1997 - 2001 with only slight engine differences. The fairing has no part number change, so I would say it should fit.
Hope that helps.

Remove gastank, remove airbox by loosening bolts outside, open airbox, remove bolts inside and take it off, then you see the plugs! Be carefull not to damage any connectors or the coil, use a 16 mm socket, 5/8", and more extensions! It could help if some of the fairing was removed too!

It does not fit.Different rear axles and cylinder head bases.

ello mate,, well theres some basturds about ay,, this happened to me once,, any way,, to bond a crack or build up a hole, turn the fairing round so u r lookin at the back of it, rough the crack or hole up with some sand paper,, then get your self some fibre glass matting wad,,and some resin, and hardener, using scissors cut the matting out to shape mix up some resin and apply to the back of the fairing,, this is messy stuff ,,but will bond it well,,then turn it over ,,if u still have a visible crack and want to repair that,, then run a grinder down the crack ,,so it widens the crack just a bit ,,and fill it with isopon filler,, just the normal kind of filler, for dents etc,,

is the fuel tap the same as the petcock or fuel valve? if it is k&l sells some kits for this.