Vapor lock? float level ? main needles to low
Check the diaphrams of all 4 carbs. 3 of the covers nipples should be capped and 1 goes to fuel pet-****. Take out the carb assembly, remove float bowls. Remove air jet and main jet. Force air through every oriface. The face of the carb on the bottom of the air intake port is 2 little holes/ports. verify all 4 intakes have the same air flow. 1 is probably restricted and choking a cylinder. After that, reassemble, install and do a carb sync. You need 4 vacume gauges. 1 hooked to the nipple on the cover of each diaphram. sync screws are inbetween each carb. There are 3. Sync 1 half of the motor(Right pair), then the other(Left pair), then BOTH(Center screw). You need to be warmed up already. If the pressure keeps moving on you then you probably have a clog in one of those ports. Dirty air filter will worsen and or cause this.
I need to know the what's the float level measurements for a 1993 gsx 750
716 views
Usually answered in minutes!
×