At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Very simple to replace only 2 wires i believe they r just tight to get to and usually in a bad spot and just usually 2 or 3 bolts and it drops when u pull iy off look and see if the gears inside looksgood and not wore out
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Now is a good time to replace it. Most auto parts stores have the special bar/scoket setup that it takes and then will loan it to you or a small rental charge. It coudl be something you do in the parking lot even though they don't like you do work there.
TO ALL VN1500 OWNERS....This once happen to me, I went to the garage to start the bike "Nothing ""The first thing is the lights are bright but no turning over,Next you think the solenoid is kaput but the answer was very simple and the fix takes 30 seconds.. Do not take the bike to bits looking for other problems and look at the clutch leaver and you will see some wires going into a plastic shroud going into the switch in the clutch leaver, Make sure this has not popped out if its connection as it some times may do after a few years due to constant turning on the handlebars, When this is not connected you will have a bike that will not fire up but comes alive and you will hear a clicking noise but this is from the engine carb area and every function of the bike will work but it will not turn over, Worth looking at and saves sixteen quid for a starter unit you never needed.
go to gadgets fix it page, they have diagrams and step by step instructions to do this, i use his site religiously you can find anything there about your vulcan
×