I have a wet clutch an it wont engage the cable broke and the main shaft for the clutch on the inside is loose and moves aroundand i have a 2002 but on the web site it only has 2003 so i put that

I think you mean that the clutch has a broken cable and it is constantly engaged. The clutch dis-engages from the gear box when the clutch lever is pulled in. The push lever axle (I think this is what you are calling the main shaft) sits in a hole on the side cover. The gear on the axle engages the push rod and the push rod separates the clutch plates by pushing on the pressure plate to dis -engage the transmission. If the axle shaft is loose, check the lock bolt. Also check the cover plate. Is the casing cracked or broken at the mounting point?

If you are calling the push rod "the main shaft", then some movement is normal when the clutch is engaged as would happen with a broken cable. Please rate my answer. Thanks.