The power from your battery goes fromt the positive post of the battery directly to the starter. At the starter, there should be two connections. The large battery cable and a smaller red wire. This red wire is "hot' wire to all the "accessories" on your bike. The wire runs straight from there to the ignition switch. If you don't have power to the main switch, you have a main fuse blown somewhere. You'll need a schematic to trace the wiring out from there. I'm sorry but I don't have a schematic for that model bike. Make sure all your connections are clean and tight and your "Run/Stop" switch in the in the proper position.
387 views
Usually answered in minutes!
×