Its flashing f1 what does that mean on my kawasaki zx6r 2007

This is all I could find in my service documents. Hope this helps.

it actually means fault indicator and doesn't deal solely with the fuel injection.

put the key in the ignition and turn it on, but don't start the bike. use the mode button to go to the odometer display, then hold the mode button down for 2 seconds. the code should be displayed.

come back when you have the code

take to kawasaki dealer to put on computer !

Hi. There ae numerous forums/site for your bike's FI codes. Since I don't know what code your FI is flashing, all I can say is put the FI code into your computer google or yahoo search area, and you will get an answer. Yiur FI should flash a few times first, and that is the first digit in the sequence. A second later, it should flash again, and that is th 2nd digit in the code. an EXAMPLE is 2 flashes, pause, 3 flashes...then repeats. That will be a code 23. Trust me, you will find the FI code online. Good luck!

Have you replaced your exhurst system if you have did you put the O2 sensor back in as f1 error code is for this sensor and your CPU can not tell if the engine is running correctly and will shut the engine down when a gear is selected

O2 sensor in muffler system not registering CPU shut down

That means that you are choosing where will the yellow "shifting" ligth turn on.
For F1 maybe it's bad fuel ar psark plugs or something like that, ar maybe power commander doesn't give right amount of fuel...