Question about 1975 kawasaki Z1B

1 Answer

I need to fit a clutch cable to my kawasaki z1b900 i need step by step instructions please

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 389 Answers

To remove the old cable first shorten the mid-cable adjuster to give as much free play as possible. If you need more free play screw in the adjuster at the clutch lever as much as possible and line up the slots so you can disconnect the cable from the clutch lever. Then remove the shift lever, and possibly the left footrest if needed to remove the front sprocket cover. Remove the cotter pin and disconnect the cable from the clutch release lever. Make a note of the routing of the old cable so you can replace it. Install the new cable with a new cotter pin at the lower end first, and route it the same as the old cable. To adjust the new cable, shorten the mid-cable adjuster as much as possible. At the clutch lever, turn the adjuster in and leave about 1/4" of threads showing between the locknut and the lever body. With the front sprocket cover still off, loosen the locknut on the clutch release lever and back the screw 3 or 4 turns. Turn the clutch adjusting screw in until it becomes hard to turn and then back it off 1/2 of a turn and tighten the locknut. Now lenghten the mid-cable adjuster until there is no free play and tighten the locknuts. Check that the lower end of the cable is fully seated in it's socket. At the clutch lever, turn the adjuster in so you have 1/16" free play, and tighten the locknut. Replace the front sproket cover and the shift lever and footrest.

Posted on Dec 23, 2009

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i remove a 1982 kawasaki kz 1000 starter motor


Follow the specific instructions in the Factory Service Manual. Step 1 - Remove the heavy wire from the starter solenoid. Either end will suffice. Step 2 - Remove the chrome cover over the starter. Step 3 - remove the screws that hold the starter motor in place. Step 4 - Lift the starter motor out of the engine. NOTE: removing the carbs may make this step simpler. The "business" end of the starter should come out of the splined starter clutch gear. If you have trouble removing the starter from the clutch gear, you may need to remove the left side stator cover to gain access to the starter clutch and chain. The exploded parts diagram is available HERE Kawasaki Motorcycle Parts 1982 KZ1000 J2 STARTER MOTOR STARTER CLUTCH...

Aug 24, 2014 | kawasaki Csr 1000 Motorcycles

1 Answer

1994 Kawasaki ZX-6R Ninja clutch cable routing


Hi, Aaron for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
1994 Kawasaki ZX 6R Ninja clutch cable routing Google Search
Correctly routing the clutch cable KawiForums Kawasaki Motorcycle Forums
How to install Clutch Wire Ninja 650
Kawasaki 1985 ZX600 Service And Repair Manual
OEM Parts for Kawasaki
Kawasaki Ninja Owners Manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Aug 06, 2013 | kawasaki ZX-6R Ninja Motorcycles

1 Answer

1996 Kawasaki VN 800 A Vulcan how to adjust the clutch cable


Hi, Tommy for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
How to adjust clutch cable Kawasaki Vulcan Forum Vulcan Forums
Vulcan 800 clutch cable and idle speed adjustment
KAWASAKI VN800 Service Manual
OEM Parts for Kawasaki
Kawasaki VN800 Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Jun 27, 2012 | 1996 kawasaki VN 800 A Vulcan

1 Answer

2007 Kawasaki Vulcan 900 Custom how to install the clutch cable


Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Clutch Cable Install Question Kawasaki Vulcan Forum Vulcan Forums
Kawasaki Versys clutch cable replacement
Kawasaki Vulcan 900 Custom Owner Manual
OEM Parts for Kawasaki
Kawasaki VN900 Custom Service Manual

Apr 18, 2012 | 2007 kawasaki Vulcan 900 Custom

1 Answer

2001 Kawasaki KMX 125 clutch will not engage


Hi, Andy and the usual suspects are:
1. Clutch cable adjusted too tight.
2. Pressure plate center screw adjusted too tight
3. A broken clutch rod.
4. Slave cylinder piston stuck.
5. Clutch plate missing from the clutch pack.
6. Clutch plates have worn past minimum specifications.
7. Clutch plates crystallized due to incompatible oil.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Clutch does not engage
Thread yz125 clutch wont engage
Kawasaki KMX 125 1986 2002 Service Repair Workshop Manual 1987 1988 1989... $22
OEM Parts for Kawasaki
http://mybikemanuals.com/kawasaki

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Oct 24, 2011 | 2001 kawasaki KMX 125

1 Answer

Kawasaki Rouser 200 clutch cable


Hi, Patz_415 for more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Clutch Cable Pulsar 200NS
https://safexbikes.com/productdetail/motorcycle-parts/clutch-cable-assy/bajaj-182-673/NLB097A
Rouser 200 220 Service Manual
OEM Parts for Kawasaki
Bajaj Pulsar 200 NS Owner Manual

May 07, 2011 | kawasaki Motorcycles

1 Answer

1995 Kawasaki ZX-6R Ninja clutch cable routing


Hi, Martyrich29 for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere $15 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Correctly routing the clutch cable KawiForums Kawasaki Motorcycle Forums
How to replace clutch cable on Kawasaki ZZR
Kawasaki Ninja ZX 6R 1995 2002 Service Repair Factory Manual Download... $15
OEM Parts for Kawasaki
Kawasaki Ninja Owners Manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Mar 10, 2011 | 1995 kawasaki ZX-6R Ninja

1 Answer

1991 Kawasaki Zephyr 750 how to change the clutch cable


Hi, Bobo56au for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere $15 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Replacing clutch cable on the Kawasaki triples
Kawasaki KZ 750 speedometer and clutch cable replacement
Kawasaki ZR550 and 750 Zephyr 1990 1997 service repair Download Manuals... $15
OEM Parts for Kawasaki
1991 Kawasaki Zephyr 750 Owner Manual

Jun 28, 2010 | 1991 kawasaki Zephyr 750

1 Answer

2007 Kawasaki VN2000 Classic clutch cable


Hi, Eddie_sotelo for more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
2007 Kawasaki VN2000 Classic clutch cable Google Search
Amazon com Kawasaki OEM Clutch Cable Vulcan 2000 2001 2010 54011 0004...
Kawasaki VULCAN 2000 Service Manual
OEM Parts for Kawasaki
2007 Kawasaki Vulcan 2000 Classic LT Owner Manual

May 28, 2010 | 2009 kawasaki VN2000 Classic

1 Answer

Installing klutch


Buy clutch cover gasket
Unhook clutch cable at clutch cover
Remove clutch cover
Remove 5 clutch spring bolts
Remove springs
Remove pressure plate
Remove plates and disc noticing order
Replace with new plates/disc in same order (after soaking in oil for at least a few hours, over night would be better.
Put everthing back together in order of removal.

May 03, 2009 | 1997 kawasaki VN 800 A Vulcan

Not finding what you are looking for?
1975 kawasaki Z1B Logo

232 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

5954 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

ROB

Level 3 Expert

858 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...