1999 police harley davidson rewired bike with new harness. I'm getting power to the coil, but no spark?
If you have power going to the coil but no spark, you've got something wrong with the "triggering" circuit of you ignition system.
One other thing, if your engine is the TC88 engine, (first year of production for some models) it probably has a "compression sensor" on it. If you have no compression, you will not have any spark. If you have your plugs out of the engine, you have no compression. So, screw a set of plugs into the engine, leave another set in the wires and grounded against the engine to test the spark.
The "triggering system" uses the signal from the ignition timing sensor that is located in the "nose cone" of the engine. Check this wiring from the ignition unit's "Black box" to the sensor. I seem to remember a plug that plugs in for this unit.
I'm afraid that this is about the only help I can give you with a stock ignition unit as I usually work with either earlier igniton systems or aftermarket units. I have very little experience with "stock" Harley units.
If you are happy with my answer please vote four thumbs up. Thank you
319 views
Usually answered in minutes!
×