Zing ear switch from a hampton bay ceiling

You can buy it online from Hover Global. Please visit: http://www.hover.global/hercules.html

Hello,
Hunter fan usually requires 3 speed pull chain switch which can be found here:
https://www.ceilingfanswitch.com/product/zing-ear-ze-268s6/
and on/off pull chain light switch, which can be found here:
https://www.ceilingfanswitch.com/product/zing-ear-ze-109/

Zing Ear ZE-301D with ZE-109M is available on this link:
https://www.ceilingfanswitch.com/product/zing-ear-ze-301d-lampholder/

Typically AC wire protocol designated black = line voltage (means \'death\') and white is neutral (cold).

The blue one will be a switched line to the motor and a meter capable of checking continuity should allow you to determine the proper wiring.

I never could find the 5 wire 4 speed replacement. I did however find a solution.
4-speed (five-wire) pull-chain ceiling fan speed switch--Use 3-speed ZE-208S6-A09.
How to use the 3-speed ZE-208S-A09 to replace a 4-speed switch:
old ZE-208S5-1T or ZE-268S5: . . . . . for ZE-208S6-A09 use:
L=Black . . . . . . . . . . . . . . . . . . . . . . . . L=Black
1=Gray . . . . . . . . . . . . . . . . . . . . . . . . 1=Gray
2=Brown . . . . . . . . . . . . . . . . . . . . . . . . (Don't use Brown)
3=Purple . . . . . . . . . . . . . . . . . . . . . . . 2=Purple
4=Green . . . . . . . . . . . . . . . . . . . . . . . . 3=Green
old ZE-208S5-1T or ZE-268S5: . . . . . For ZE-208S6-A09 use:
L=Black . . . . . . . . . . . . . . . . . . . . . . . . L=Black
1=Gray . . . . . . . . . . . . . . . . . . . . . . . . 1=Gray
2=Green . . . . . . . . . . . . . . . . . . . . . . . . (don't use Green)
3=Brown . . . . . . . . . . . . . . . . . . . . . . . . 2=Brown
4=Purple . . . . . . . . . . . . . . . . . . . . . . . 3=Purple

don t matter but wired wrong

Hi Eric...
Click here Amazon com zing ear switch and chose the best one for you. Anyway contact the seller before buying, to see if fits on your model. I hope this helped.
enjoy

http://www.ceilingfanparts.com/images/product.htm

It's actually a very easy repair. Those pull chain switches are very generic and can be found at home depot or any hardware store for about $3. As far as changing the switch there are only 2 wires to connect and there is no incorrect combination to reconnect them.

I’m happy to assist further over the phone at https://www.6ya.com/expert/jerry_612d8419f8984578

go to your nearest electronic shop or electronic parts supplier theres a lot of switches to buy just bring your old ones.