Details here on Page 94
11. Following the tightening sequence shown in
Figure 15, torque the fasteners in 1/2 turn increments and in two stages to the specifications.
Torque the fasteners to 1/2 the given torque, then
torque them to their final specifications:
a. Cylinder head nuts (1-4, Figure 15): 50 N•m
(37 ft.-lb.).
b. Cylinder head cap nut (5, Figure 15): 35 N•m
(26 ft.-lb.).
c. Cylinder head bolts (6 and 7, Figure 15): 20
N•m (15 ft.-lb.).
12. If the cylinder has also been reinstalled, torque
the cylinder bolts (A and B, Figure 23) to 10 N•m
(89 in.-lb.). One of the bolts sits in a recess (B, Fig-
ure 23) in the cylinder block.
13. If removed, install the locating pin (B, Figure
21) into the camshaft
Engine Lower End Torque Specifications - V star 1100
https://www.manualslib.com > ... > Owner's manual
Yamaha V star 1100 Manual Online: Engine Lower End Torque Specifications. Item N•m Alternator cover bolts 10 Connecting rod nuts 48 Crankcase stud 10 mm 20 ...
for what make and model???
×