- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The cold weather may cause your Yamaha Timberwolf to experience hard starting, several months and no use, or a stale fuel supply. Start by replacing the spark plug, if the engine still does not fire up, clean the carburetor and make sure all the hoses are connected tightly with no air leaks. If none of these strategies work, the carburetor may need to be adjusted or replaced. You may want to take it to an experienced mechanic if you are unable to get the engine started.
If you can tell me your vin - or your year I can tell you what model you have. But - if you go onto any parts site - such as cheapcycle.com or partsmonster - you name it - you won't need your 'model' # - just your year. You'd click - Yamaha OEM Parts, then ATV then Year - 1992 - 1998 was the Timberwolf - a lot of parts from the 99 - 04 Bear Tracker will work (just about only changed the plastics and carb in 99 - 04) same engine/transmission/rear end, etc. the brakes also went from drum to disc - but you'd click on the year - and then look - the timberwolf will be right there the 1992 - 1998 Yamaha Timberwolf 250 - I can't remember if they offered a timberwolf 350. If you can tell me the vin or year - like I said - I'll reply with your exact model # - but you can buy and order most parts just by model name and year 95 Timberwolf.
? 3:08
www.youtube.com/watch?v=0fypjxwZV40
May 16, 2010 - Uploaded by omar arriaga
HERE IS MY NEW PROJEC PAINTING MY 250 TIMBER WOLFIM REPARING ... back break replacement on Yamaha timberwolf 250cc tutorial ...
look for the thermstat and change out because of sticking.Over heating will cause rings not to have the ridge force needed to keep compression at normal .
Go to the site below where you can see a parts diagram for your specific ATV. You will select the actual brand, year, model, etc., once you go to the site. Part numbers and prices are also shown. You can order parts from this site. In the event no price is shown on a particular part and/or the notation "Not Available" is in the description, the part is not in stock. www.babbittsonline.com/pages/parts/viewbybrandand/parts.aspx
It looks like all you need to do is remove the right rear wheel to get access to the brake.
what an *******. If I had a manual or my library had one I wouldnt be asking the question. If I need help fixing something dont tell me to go jump in a lake just dont answer
Firstly, if you are not a mechanical person you should never buy a vehicle that does not run.
However, here are some basic tests.
1. Connect a good battery.
2. Remove the spark plug.
3. Turn the motor using the starter motor or kick starter.
4. check for spark by inserting a new plug into the plug cap. (make sure the plug is grounded).
If the motor turns freely and there is spark, chances are good that the motor will run. This does not mean that the motor is in a good condition. Only with the motor running will you be able to know for sure.
You will now have to source a carb and fit it to the 4 wheeler.
Fitting the carb is not too difficult. Check that the intake manifold is not perished or torn, and remember to use the airfilter.
Left side, forward of the foot peg and hidden behind the gear selector.
If it's a 4 wheel drive, you'll need to drain the transfer case oil at the same time.
×