I have a 2007 KTM 450sxf after i ride it it dies within a minute

Drain oil. Use degreaser to clean area. Use JB Weld & allow to set up properly before adding oil.

If you’ve found this helpful, please click the green “helpful” icon. If you have 20 seconds please leave a few words as a review or recommendation! Also, follow me for more answers to everyday issues, I’m all for saving you money and making the most of your time! Thanks and have a great day!

Too many possibilities for this site. Get hold of a local biker/shop to help.

This bike is so. What can we do?

Your hub on the shaft - the nut is too tight. The nut is pushing the hub too far on the shaft and making it a drag. Need to back the nut off and torque it at factory spec. That could be somewhere between and 12-15 lbs. This has happened to someone else I know.

No, totally different engine. 07 and above 450SXF will work.

the solinoid coil seems suspect, as jumping across terminals bypasses coil

why would you tilt it side to side? OR is it doing that when you are goin into turns. If you are tilting it while running and not riding it, you are probably starving the oil pump. And is not pumping to the engine. and starving the motor of oil.

Check the post you submitted yesterday. There are a couple solutions listed for this issue.

Will it turn over at all?

i would check the main fuse first then i would check the charge in the battery the shorted charger may have discharged the battery or killed some of the cells