When i put the lights on, and my indicators ,the indicators dim the lights. also the indicators flash quickly it is a kymko zing 125 the battery is dud could this be the problem
Re: When i put the lights on, and my indicators ,the...
Yes, the battrey is problem
1. the battery should be charged or buy the new battery.
2.while buying new battery you can go for higher voltage capcity battery
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Check the battery negative cable if its tightened well to the frame or the engine, check too, the fuse box and the main wire to the starter solenoid and the connections to the starter too, this sounds to be an electrical lose connection somewhere..just go along throught the wires and connections..
Hope this helps!
You have a poor or missing earth on your lights and are getting feedback. Earth with a spare piece of wire each lighting earth point to isolate. The bad earth will be shown when the fault stops by using the tempory earth wire. Remove faulty earths and clean contacts.
your best try is to contact your dealer, and get them to order you the short red wire that runs from the + terminal on the battery, to the starter soleniod ( also has a thin red wire that runs to fuse holder) i had exactly the same problem and this solved it. i have however re done all the electrical connections on my bike using 7amp wire and bullet connectors, as i have had many faults with the electrics before.
My bike is a Kymco Cruiser 125 (almost exactly the same bike, i use kymco zing parts when replacing) i paid approx £16 GBP for the wire.
×