Need the circiut diagram in english for xjr 1200
SOURCE: Speedo not working
Ok have a look at the back of your speedo there should be a black cable with a silver screwcap that runs into the back of the speedo case unscrew the cap inside the cap there is a cable with a triangle shaped end give it pull with a pair of plyers if it does not come out this is a good thing your cable is not broken if you can slide it out of t it 's housing then you need yourself a new one.Also if it is not broken follow it down to the front wheel there is another cap unscrew this end it should be the same triangle shape cable inside as the other end if not it has broken off at this end .
SOURCE: my rev counter, speedo, fuel gauge and temp gauge
try to check yor meter conection at the rear of your meter.there is a loose connection due to vibration
SOURCE: I have an Y Reg XJR 1300 SP, Rev Counter
This happens every time you first turn the bike on, just before you hit the start switch, right? That's normal...your bike has a "brain" that goes through a systems check when you turn the key.
SOURCE: have no electrical system at all. lights horn fuel
G'day, sounds like maybe you've blown your main or ignition fuse, would be the first place i'd check, then maybe battery conections to make sure the wiring looms being suplied with power from the battery. Hope this helps :)
526 views
Usually answered in minutes!
×