How do I change the color of my radio screen on my 07 Electra glide classic @
Hi, John for this scenario you will need your service manual that has all fastener torque specs -fluid capacities and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Harley, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below and for more specific information or questions at no charge please feel free to contact me at [email protected]. Good luck and have a wonderful day.
https://www.hdforums.com/forum/touring-models/720405-can-you-change-the-color-of-radio-led-readout.html
http://www.mediafire.com/file/3rzn9j2ado3lr51/2007+Harley+Touring+Service+Manual.pdf
https://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?make=hdmc
https://ownersmanuals2.com/harley-davidson/heritage-softail-classic-2007-owners-manual-66495
https://www.6ya.com/how-6ya-works to speak to me personally.
SOURCE: Where is the oil pan plug located on a 1999 Harley
No oil pan plug, it is a sump system. Just find the oil tank, drain it, change the filter.
SOURCE: How do I change the front and rear brakes on a
Not too hard - Undo the two bolts on the caliper and then seperate the caliper and pull the old ones out. Insert the new ones and put the bolts back in to hold the caliper back together and then install them back on the bike with the two retaining bolts. Use a bit of lock tight (Blue) on the threads. Warning do not let anyone apply pressure on the brakes while you have them off the bike or you will have a mess and/or a problem.
SOURCE: How do you remove the tour pack on 2007 Electra
Disconnect all of the electrical connections including the antenna wire from under the seat going to the tour pack and then remove the four nuts under the tour pack which holds it to the mount. At this point, simply lift it off.
SOURCE: how to ofill the primary case on a2003
Stand the bike straight up, Remove the derby cover. Fill the primary up with oil until the oil barely touches the lower edge of the clutch spring. The clutch spring is a flat dark colored piece of metal inside the bright aluminum clutch outer shell. Do Not overfill. If you do, your clutch will drag and you will not be able to find neutral with the engine running.
Good Luck
Steve
152 views
Usually answered in minutes!
×